Automotive Cooling Fan Balancing Machine Radiator Fan Balancing

Automotive Cooling Fan Balancing Machine Radiator Fan Balancing

Before the automobile air conditioning cooling fan is configured in the factory, a fan balancing machine will be used to correct the dynamic unbalance. When it comes to balancing machine, I believe that many auto parts manufacturers should be more familiar, the dynamic unbalance correction of many rotating workpieces is carried out by the balancing machine, and the automotive air conditioning cooling air fan balancing machine is a machine that does dynamic unbalance test for the car cooling fan.

So what are the functions of the fan balancing machine? Why do car cooling fans need dynamic unbalance correction? The automotive cooling fan balancing machine developed by Shanghai Jianping can detect the dynamic unbalance of the automotive cooling fan, and can consider the dynamic unbalance detection of the single-plane exhaust fan according to customer requirement. The cooling fan can effectively improve the quality of the fan after dynamic unbalance detection. The automobile fan balancing machine includes an unbalance measuring table, a workbench, a balance clip box.

Unbalance test procedure

Manually place the cooling fan on the measuring table of the balancing machine → press the two-hand start button → Safety door closes → Perform the fan unbalance test → After the unbalance test, the fan stops rotating and the safety door opens. If the unbalance of workpiece is NG, then manually correct the unbalance according to the unbalance amount and angle displayed on the screen, after correction is completed, start to measure again → If the workpiece is OK, continue the performance test (you can choose to open or close) → Manually remove the fan from the measuring table of the balancing machine → Repeat the above action for the next fan dynamic balancing.

By using its strong software development ability and mechanical structure design ability, Shanghai Jianping R&D team has solved the precision speed sensor design, precise positioning, mathematical model establishment, automatic tool setting and tool feeding, dynamic density compensation and other problems. It has a full set of system intellectual property rights and can modify, optimize and improve the corresponding solutions to the balancing machine at any time. Welcome to contact us.