1.PHQ hard bearing/PRQ soft bearing auto -positioning balancing machine series adopts advanced servo/stepper motor drive which can achieve accurate automatic positioning.it will automatic stop after measurement is qualifiedOtherwise it will stop at the unbalance pointAvoid manual looking for anglesthereby improve working efficiency 2.Under slung belt driveIt is convenient to upload and down rotor. 3.Powerful balancing machine software can achieve:chinese and english interfaceautomatic measurementautomatic positioningdata analysisprintingnetworking and more control function. 4.680D balancing measurement software equips with complete high precision acquisition board.higher measurement accuracytouch-screen interfaceoperation will be more convenient 5.The machine is specially suitable for micro-motor electric tool and other small shaft of the rotor batches balance

PHQ-1.6D/5D/16D Auto Positioning Balancing Machine (Harding Bearing)

Technical data at a glance	PHQ-1.6D/5D/16D	PHQ-G5D/16D
Max Mass of Workpiece (kg)	1.6/5/16	5/16
Max Diameter of Workpiece (mm)	Φ260	Φ300
Distance between Two Support Bearings (mm)	40~500	15~500
Journal Diameter Scope of Workpiece (mm)	Φ3~30	Φ3~40
Diameter Scope of Driving Belt (mm)	Φ20~200	Φ20~200
Rotational Speed when the Diameter of Driving Belt is100mm(r/min)	~14701)	~14101)
Motor Power (kw)	0.4 servo motor	0.2 DC motor
Min Achievable Residual Unbalance Amount (emar)	≤0.15g· mm/kg	≤0.15g· mm/kg

PRQ-0.5D/1.6D/5D/16D Auto Positioning Balancing Machine (Soft Bearing)  

Technical data at a glance	PRQ-0.5D/1.6D	PRQ-5D/16D
Max Mass of Workpiece (kg)	0.5/1.6	5/16
Max Diameter of Workpiece (mm)	Φ150	Φ350
Distance between Two Support Bearings (mm)	20~320	20~320
Journal Diameter Scope of Workpiece (mm)	Φ2~10	Φ5~35
Diameter Scope of Driving Belt (mm)	Φ10~50	Φ5~200
Rotational Speed when the Diameter of Driving Belt is100mm(r/min)	~14701)	~14701)
Motor Power (kw)	0.1 servo motor	0.4 servo motor
Min Achievable Residual Unbalance Amount (emar)	≤0.1g· mm/kg	≤0.15g· mm/kg
Power	AC220V, Single-Phase, 50HZ	AC220V, Single-Phase, 50HZ

PR2Q-0.5D/1.6D Two Station Soft-bearing Auto-positioning Balancing Machine 

	PR2Q-0.5D	PR2Q-1.6D
Max Mass of Workpiece (kg)	0.5	1.6
Max Diameter of Workpiece (mm)	Φ150	Φ150
Distance between Two Support Bearings (mm)	20~320	20~320
Journal Diameter Scope of Workpiece (mm)	Φ2~10	Φ2~10
Diameter Scope of Driving Belt (mm)	Φ60	Φ60
Rotational Speed when the Diameter of Driving Belt is100mm(r/min)	~12001)	~12001)
Motor Power (kw)	0.05 stepper motor	0.05 stepper motor
Min Achievable Residual Unbalance Amount (emar)	≤0.1g· mm/kg	≤0.1g· mm/kg
Power	AC220V, Single-Phase, 50HZ	AC220V, Single-Phase, 50HZ

PHQ-50D/160D Large Sized Auto Positioning Balancing Machine 

Technical data at a glance	PHQ-50D	PHQ-160D
Max Mass of Workpiece(kg)	50	160
Max Diameter of Workpiece (mm)	Φ700	Φ1000
Distance Between Two Support Bearings (mm)	80~700	130~1270
Journal Diameter Scope of Workpiece (mm)	Φ 8~140	Φ 15~180
Diameter Scope of Driving Belt (mm)	Φ20~200	Φ40~400
Rotational Speed when the Diameter of Driving Belt is 100mm (r/min)	700,10501)	12601)
Motor Power (kw)	1.5 servo motor	3 servo motor
Min Achievable Residual Unbalance Amount (emar)	≤0.15g· mm/kg	≤0.15g· mm/kg

PRS-0.3D/1.1D Auto Positioning Balancing Machine

Technical data at a glance	PRS-0.3D	PRS-1.1D
Max Mass of Workpiece(kg)	0.3	1.1
Max Diameter of Workpiece (mm)	Ø40	Ø80
Distance Between Two Support Bearings (mm)	7-70	15-110
Journal Diameter Scope of Workpiece (mm)	1.5-8	2-12
Balancing Speed when Diameter of Driving Belt is 40mm（r/min)	~3670
Motor Power (kw)	0.1 servo motor	0.1 servo motor
Min Achievable Residual Unbalance Amount (emar)	≤0.15g·mm/Kg	≤0.15g·mm/Kg
Power Supply	Single-phase 220V 50HZ	Single-phase 220V 50HZ

1)Stepless speed regulation

PDF Brochure