logo
page-banner

NEWS

AUTO TECH 2019 10 May

AUTO TECH 2019

Vibrant and full of flowers. From May 9th to 11th, 2019, the 6th International Auto Parts Processing and Automotive Mould Technology Exhibition was held at the Wuhan International Expo Center. The exhibition scale is 30,000 m2, with over 400 exhibitors and 20,000 spectators. The gathering of heroes, the assembly of heroes, the procurement of more than 80 OEMs and 3,000 auto parts manufacturers and related responsible persons came to visit[...]

Read more
Automatic brake disc balancing machine 07 May

Automatic brake disc balancing machine

Automatic balancing machine is mainly used for the detection of unbalanced parts of the rotary parts and automatic correction. Due to the design, uneven material and manufacturing installation and other reasons, rotary parts often have a large initial unbalance. Such unbalanced rotary parts will produce periodic excitations, causing vibration and noise, increasing equipment energy consumption, speeding up mechanical wear, reducing service life, triggering equipment failure, and even causing accidents. To achieve a balance, to meet the eligibility criteria. Data shows that the high-speed rotary machinery caused by excessive vibration of the exciting force, 95% of the rotary parts by which the balance caused by poor imbalance. Balanced technology and related equipment in the motor, power tools, household appliances, pumps, fans, automotive, chemical, high-speed rail, electricity, ship and aerospace and other industries are widely used.[...]

Read more
Why does crankshaft need to be balanced? 06 May

Why does crankshaft need to be balanced?

Application of crankshaft dynamic balance Crankshaft is a special type of rotor, it does not have a correction plane at any position for structural reasons. That is to say, we can't find an entire circumferential plane to do correction, no matter where the correction plane is. And adding weight (or removing weight) operation which aimed to improve balancing situation can only be done at certain special locations. In addition, crankshaft was multi-point support when working, and its working speed was far below the critical speed, so the crankshaft can be regarded as a kind of rigid rotor with special structure.[...]

Read more
What type of Balancing Machine is better for motor ? 29 Apr

What type of Balancing Machine is better for motor ?

What type of Balancing Machine is used to test the motor better? This first depends on the size of the motor rotor, speed and so on a series of parameters to select the Motor Balancing Machine. The reason for this choice is because the motor motor if the parameters of the difference is relatively large, you should use a different Balancing Machine, or test the effect we want. So, what kind of motor rotor we have to choose what kind of Balancing Machine to test, can not be suitable for testing the motor rotor big Balancing Machine machine to take the test motor rotor small motor, so the test results will be very accurate! So we just need to figure out some of the parameters of the rotor and the Balancing Machine machine should be able to know how to use different types of Balancing Machines to test the motor rotor dynamic Balancing Machine.[...]

Read more
Overview of cardan shaft balancing issues 26 Apr

Overview of cardan shaft balancing issues

Cardan shaft is an important part in the automotive transmission system. Its role is to work with the gearbox and drive axle to transfer the power of engine to the car wheels, so that the vehicle will generate driving force. For cardan shaft which in the front-engine rear-wheel drive car, it transfer the rotating of transmission to the main decelerator[...]

Read more
Fan Horizontal Balancing Machine 25 Apr

Fan Horizontal Balancing Machine

General machine contains a large number of rotating parts, such as: drive shaft, spindle, motor, and turbine rotor. When any rotor rotates around its axis, centrifugal force is generated due to uneven distribution of the mass and distribution relative to the axis. This unbalanced centrifugal force acts on the rotor bearings to cause vibration, noise and accelerated bearing wear, which seriously affects the performance and longevity of the product. For this reason, the rotor must be balanced to the desired level of equilibrium accuracy or to extent that the resulting mechanical vibration amplitude falls within the allowable range. Rotary components such as impeller, motor rotor, machine tool spindle, internal combustion engine crankshaft, turbine rotor, and gyro rotor and watch wheel and so on are all need to be balanced to run normally.[...]

Read more
Why cross flow fan need do balancing measurement 24 Apr

Why cross flow fan need do balancing measurement

Cross Flow Fan is mainly composed of the impeller, airduct and an electric motor. It was a widely used air supply component in the split-type air conditioner, and its aerodynamic characteristics determine the air volume, noise, power consumption and other performance indicators of the household air conditioner[...]

Read more
High Precision Brake Disc Balancing Machine 23 Apr

High Precision Brake Disc Balancing Machine

Automatic balancing machine is mainly used for the detection of unbalanced parts of the rotary parts and automatic correction. Due to the design, uneven material and manufacturing installation and other reasons, rotary parts often have a large initial unbalance. Such unbalanced rotary parts will produce periodic excitations, causing vibration and noise, increasing equipment energy consumption, speeding up mechanical wear, reducing service life, triggering equipment failure, and even causing accidents. To achieve a balance, to meet the eligibility criteria. Data shows that the high-speed rotary machinery caused by excessive vibration of the exciting force, 95% of the rotary parts by which the balance caused by poor imbalance. Balanced technology and related equipment in the motor, power tools, household appliances, pumps, fans, automotive, chemical, high-speed rail, electricity, ship and aerospace and other industries are widely used.[...]

Read more
Auto Parts Balancing Machines Troubleshooting 22 Apr

Auto Parts Balancing Machines Troubleshooting

Auto Parts Balancing Machines Calibrate Workpiece Unbalance Requirements Exceeds the ability of Auto Parts Balancing Machines to minimize residual balances, which means that the balance accuracy of Auto Parts Balancing Machines does not meet the requirements of workpiece balancing[...]

Read more
Causes and solutions for industrial fan impellers balancing 18 Apr

Causes and solutions for industrial fan impellers balancing

As a universal mechanical equipment, the industrial fans is mainly used in mine, underground engineering, underground power plant ventilation; boiler ventilation and air intake; high temperature corrosive gas emission from chemical plants; ventilation of workshop and atomic protection equipment. Fans are widely used, in short, to assist in full combustion, ventilation and transportation, and involve almost all areas of the national economy.[...]

Read more
Fast rotor repair also improves efficiency 17 Apr

Fast rotor repair also improves efficiency

When a damaged steam turbine rotor needed to be repaired, a power generation plant in China. It turned to Jp balancing machine for an expert service. Rather than wait for at least a year for a new rotor from the original equipment manufacturer (OEM), the plant opted for a repair that took only sixteen weeks. This swift and effective repair also managed to achieve an 8% improvement in efficiency.[...]

Read more
Jp Balancing Machine Offers New Service Level Agreements 16 Apr

Jp Balancing Machine Offers New Service Level Agreements

To maximize machine uptime, Jp balancing machine introduces new levels of service and support for existing customers. Our service level agreement plans allow you to budget for inspection, preventive maintenance and repairs in advance to ensure longevity, repeatability, accuracy and precision for your manufactured quality parts. Jp balancing machine offers different levels of coverage to ensure all customers can benefit.[...]

Read more
Balancing Machine Busineess Trip To Indonesia 15 Apr

Balancing Machine Busineess Trip To Indonesia

Our technical team will have a busineess trip to Indonesia from 21to 30 April 2019 Are you worried our technical strength? Are you confused with which model is suitable for your workpieces most? We think these questions will be removed after we have a face to face meeting.[...]

Read more
2019 Balancing Training Seminar 12 Apr

2019 Balancing Training Seminar

Jp Balancing Machines next Balancing Theory and Application Seminar will take place on April 20-21, 2019 at Jp Balancing mahcines. This is a two-day course that includes engaging classroom and hands on training. Our trainers have over 70 years of experience in the balancing industry combined. With training, attendees will improve their balancing processes, identify unbalance, correct unbalance, understand the goals of different kinds of tooling, and reduce errors to save time and money.[...]

Read more
The Spindle Protect Technology-Automatic Balancing Machines 11 Apr

The Spindle Protect Technology-Automatic Balancing Machines

The dynamic balance of the disc rotor is mainly used as a vertical balancing machine. The work piece is fixed by the splice tray and the spindle and the motor drives the spindle to rotate. The pendulum frame detects unbalanced amount and then passes through the triangular chuck clamping plate, turns to the positioning, The positioning clamping system is one of the most critical parts in fully automatically balancing machine in which the positioning of the three-jaw chuck on the work piece is achieved by direct clamping of the adapter plate.[...]

Read more